Enterprise
Design & Rating of Finned Pack Heat Exchangers
Heat recovery, calculation of components in series, analysis of smooth tube and other fluids.. thanks to UNILAB COILS ENTERPRISE all this is possible. Even more required by our customers, the ENTERPRISE Edition is the more detailed and comprehensive tool for advanced Technical Dept. of thermal engineering companies.
Technical Specification
In Condensing modality, it is possible to make the overheating and subcooling analysis, in addition to the analysis of each phases (deoverheating, condensing, subcooling) with the calculation of each surfaces’ portions. In Direct Expansion, besides the overheating and subcooling analysis, our program allows the user to use different equations. It is also possible to print the flow map and to select distributors. In the Pump Evaporator, it is available a system for fine calibration and an alternative method for the calculation of the same.
Available a wide archive of geometries. The user may easily add in the archive new ones.
Possibility to calculate radiators with rectangular or rounded rectangle tubes
Possibility for the user to calculate coils in VERIFY (with the mandatory insertion of all geometrical data) or in DESIGN modality.
the software gives the possibilty to calculate coils that have a certain number of non fed tubes
Possibility to manage different parameters such as tubes, fins and manifolds. Available in the program a wide archive of thermophysical properties of fluids (pure liquids, liquid mixtures, pure gases and refrigerants), aligned to PROP8 - NIST. Recently add new fluids (R1234YF and R1234ZF).
Unilab Coils has a tool to accurately calculate the coil's cost
This application allows the user to calculate the balance point of the coil, linking its relative axial fans and compressors.
Possibility to calibrate geometries in various points.
This tool allows the user to calculate and obtain the refrigeration cycle's diagram, making it possibile to determinine their pressure drops. Furthermore, the user may easily calculate the complete refrigerant cycle of a unit composed by a condenser, a compressor and an evaporator.
Possibility to calculate a system composed by coils, air compressors and mixing boxes in series.
This application gives additional information about the system efficiency.
Printout for 1-1 recuperator coil with coils drawing
Functionalities
Available in all calculation's modalities (heating, cooling, condensation, direct expansion, steam and pump evaporator).
Available in all calculation's modalities (heating, cooling, condensation, direct expansion, steam and pump evaporator).
The program allows the user to save projects in individual external files, that can be reopened later.
The program allows to save data outputs in Excel format.
The user may work using different units of measurement. It is possible to modify them, or add new ones.
Possibility to export printouts in PDF format and WORD without any external utility.
Tool that allows to specify the project details. These information will be visible in printout.
Possibility to calculate the capacity in function of rows number, in function of the number of circuits, in function of air flow, in function of the fluid inlet temperature (fixed air – fluid delta T), air pressure drop in function of air flow, fluid pressure drop in function of fluid air flow, fluid pressure drop in function of the number of circuits, fan and compressor balance point.
Tool that allows to specify the logo. These information will be visible in printout.
The user may introduce drawings, that can be used in the printouts. The program recognizes the EMF format. Possibility, with an external utility, to convert format DWG and DXF.
Quote calculation script
Software available in the following languages: Italian, English, German, French, Turkish, Russian, Spanish and Brazilian
Available the upgrade of the software by Internet
The Software UNILAB COILS suitable also for no-latin languages, such as Russian.
The customer can manage languages by Excel sheet
Possibility to configure catalogues, making it possibile to export performance tables.
Possibility to change the units of measurement in print preview and to cover up the lines
It's possible to add new languages, till a maximun of 10. It's enough to provide to UNILAB additional translations (by Excel file) for the integration of new language in the management software.
Integrated PageBuilder, that allows the customization of the printout modules and the insertion of new printouts.
Possibility to customize the printouts by template Word.
Possibility to calculate the quotes of the drawings by Script. Also VB Script Engine is integrated.
UNILAB provides a technical license by hardware activation. This key allows the user to use the license in every computer where the software and key are installed.
UNILAB provides the technical support only to customers with regular subscription of maintenance contract, with automatic renewal, except the receipt of written notice within 3 months before the expiration date and this annual quote covers up to a maximum of n° 3 technical licenses.
Service available only for customers with regular subscription of maintenance contract. The customer can benefit of this service upon quotation, based on certain parameters such as numbers of geometries, calculation’s typologies, etc.
3D view of a coil project; possibility to design the frame up to the single metal sheet; estimated manufacturing cost and weight of coil and possibility to export drawings in your favourite 2D CAD environment.
