UNILAB RADIATOR SUITE

Our one-of-a-kind Software suite to size Compact Heat Exchangers!

RADIATOR SUITE

5 MODULES FOR YOUR RADIATORS

UNILAB RADIATOR SUITE gives the possibility of rating the compact heat exchangers used in several fields, such as automotive (radiators), gas generators used in various cycles for production of power energy.
The software consist in 5 separate modules: Tube & Fin, Plate & Fin, CAC Core Assly, PAF3 & ALOA. It allows the calculation of different combinations of monophase fluids.

Currently, UNILAB RADIATOR SUITE, like all UNILAB software, uses a wide variety of fluids: it contains the thermodynamic properties from the NIST (National In-stitute of Standards and Technology) latest version of the Refprop library.

THE MAIN 3S

The name Tube and Fin derives from the fact that this exchanger is composed of two tubes and between them there is an exchange element which is either a fin or a bar. TUBE&FIN allows the calculation of combinations of monophase fluids aeriform-liquid.
The name Plate and Fin derives from the fact that this exchanger is composed of two plates and between them there is an exchange element which is either a fin or a bar. PLATE&FIN module allows the calculation of different combinations of monophase fluids: aeriform-aeriform, aeriform-liquid, liquid-liquid.
The module CAC CORE ASSLY allows the calculation of combinations of monophase fluids: aeriform-aeriform or liquid-liquid.

+ 2 NEW NEW MODULES!

PAF3 allows to design a combined radiator, and is a software capable of handling three separated gas flows impelling on the same heat exchanger. PAF3 considers radiators which have a common frontal side, where air impacts on the radiator, which is then divided into different sections (in PAF3 you can divide in 2, 3, 4 sections.) with, for example, water and glycol flowing on one section, then oil flowing on the other, and air flowing on the third section. The program also allows you to change the fluids on the different sections and to consider different fin types per each section! ALOA allows instead to design radiators with round tube core configuration, using oval brass tubes ( in line or staggered) and flat copper fins ( could be louvered or dimpled).

RADIATOR SUITE is a software that offers the possibility of rating the compact heat exchangers used in several fields, such as automotive gas generators (radiators), used in various cycles of power production.

The following modules are available: PLATE&FIN, TUBE&FIN, CAC CORE ASSY, PAF3, ALOA.

All designs in Radiator Suite are application specific, ensuring efficient and cost effective design with regard to heat transfer and the fin and geometric data relative to the heat exchanger and you can fine tune this according to your laboratory data.

Why would you prefer RADIATOR SUITE?

UNILAB RADIATOR SUITE IS UNIQUE, and allows a wide choice of different types of fins and/or bars. UNILAB RADIATOR SUITE allows the calculation using any geometry, such as corrugated and multiport fins, louvered fins, corrugated, smooth, offset strip, oneport tube and multiport tubes. The great advantages are two: choosing the right module for your radiator, and fine-tuning the software according to your laboratory data! This is Radiator Suite!